Some consumers may find that your laptop does not boot successfully and the type Dell Latitude E5400 battery was installed and the adapter was connected. There are many factors that may cause such a problem. Let's resolve them one by one. 1. The AC adapter First, make sure that the outlet is in perfect condition and the adapter is connected properly. Some adapters also illuminated display that can show the power on or off. Remove the power supply and other external devices, including the Dell inspiron 1525 battery. Then you can press the Power slider or the power button for about 30 seconds to discharge the static charges that could have saved in the notebook. With the prolonged use of the notebook, some static charges tend to remain in the notebook and charge do not allow the notebook to function normally. Then you can connect the AC adapter and turn off the notebook. If the notebook does not turn on, check the power LED on the notebook. If the light is off or there is loss of light, then the problem is mostly with A / C adapter. 2. The battery you can from the power supply and some other external device, and then remove the Dell Latitude d620 battery. Press to remove the power button for 30 seconds to charge. Install the battery and turn on the notebook, see if he starts. (Connect the power supply now) If the notebook does not boot up, the problem is probably with the battery. At this time we can fix the problem, battery calibration, follow these steps: a. Turn on your notebook. b. Connect the power adapter and fully charge the Dell XPS M1530 battery. c. Start your notebook. d. Press the F8 key to boot into Safe Mode. e. Disconnect the power adapter and fully discharge the battery until the notebook is turned off. 3. The display, the notebook can not boot from the fact that lead is something wrong with your notebook display. You can try to connect an external monitor and see if you can get on an external display device. Sometimes the display driver and damaged the cause of the problem is not always the indicator could be on your notebook. You can solve the problem by updating or reinstalling the video driver. Also check with the manufacturer's website if there is an updated BIOS for your notebook model. Close attention should be paid while updating the BIOS. If it is not accurate or updated when you have older BIOS that turns your notebook does not work. 4. The hard drive is sometimes the crashed disk can also be one of the reasons for notebook will not boot. 5. If the system files corrupted system files are corrupted, the notebook can not boot into Windows. Then it is advisable to install the operating system.
没有评论:
发表评论